ACR Electronics RCL-75 SEARCHLIGHT Especificaciones

PRODUCT SUPPORT MANUAL Y1-03-0158Rev. DRCL-75 Product No. 1946Remote ControlSearchlight System ACR Electronics, Inc.5757 R

Y1-03-0158 Rev. D 87.0 CARE AND MAINTENANCE The RCL-75 is relatively maintenance free. Clean the exterior of the light with a mild detergent and

Y1-03-0158 Rev. D 917) Set reflector housing into the swivel sockets with the light pointed down and carefully engage the gear rack. (make sure the

Y1-03-0158 Rev. D 10 FIGURE 10 FIGURE 11 FIGURE 12 FIGURE 13 FIGURE 14 FIGURE 15

Y1-03-0158 Rev. D 11 FIGURE 16 FIGURE 17 FIGURE 18 FIGURE 19

Y1-03-0158 Rev. D 129.0 RCL-75 SPECIFICATIONS (with Remote Control Point Pad™) 9.1 Specifications RCL-75 Power Requirements 12 – 14 Volts DC Cur

Y1-03-0158 Rev. D 1310.0 ACCESSORIES Here is a list of options and replacement parts that can be ordered for your searchlight. Product Number 1)

i Y1-03-0158 Rev. D TABLE OF CONTENTS 1.0 FORWARD ...

Y1-03-0158 Rev. D 11.0 FORWARD Congratulations and thank you for purchasing the ACR RCL-75 Searchlight. The combination of computer aided design; h

Y1-03-0158 Rev. D 2 FIGURE 1 FIGURE 2 3.0 UNPACKING THE UNIT Every effort is made to assure that the RCL-75 has been delivered in good conditi

Y1-03-0158 Rev. D 3 FIGURE 3

Y1-03-0158 Rev. D 44.0 WIRING The RCL-75 has two wiring requirements: 1. Connect the remote control to the light 2. Connect the light to 12-vol

Y1-03-0158 Rev. D 5 Depending on the location selected, your light will need 1/4” diameter stainless steel bolts, nuts, and washers. If mounting are

Y1-03-0158 Rev. D 6 FIGURE 4 5.4.1 Surface Preparation for light Make sure surface is clean and dry. Verify that drill holes will not impact or

Y1-03-0158 Rev. D 7 FIGURE 5 6.0 OPERATION The remote control Point Pad™ is simple to operate. A red LED tells you that power is available. A