ACR Electronics SmartReader Plus Manual de usuario descargar pdf (Pagina 60)

TrendReader Standard 2

2005 ACR Systems Inc.

5.5.2.1

Connection Setting

When you select a connection setting in the Connection Settings node, the Work Area shows

the properties of the setting. If it contains a network, the loggers in the network are also

displayed.

When you scan a connection setting, its properties are copied to the corresponding COM Port

in the Connections Node, as shown below, and the loggers are contacted.

Under the Connection Settings Node you will also see COM Port connections. These system-

defined connections store the original COM Port settings. In the example above, the "My

Local SRP Network" setting is for a network of loggers connected on COM1. If you are

finished with the network of loggers and want to connect a single logger to COM1, you can

simply select the COM1 setting in Connections Settings and then scan for the logger.

The connection settings are grouped together by COM Port. COM1 and saved settings using

COM1 will be shown first at the top of the list. Listed next would be COM2 and saved settings

that use COM2.

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 197 198

Sin comentarios

ACR Electronics SmartReader Plus Manual de usuario Pagina 60