ACR Electronics Nauticast2 Especificaciones Pagina 39

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 92
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 38
Wind speed is displayed in
your choice of units:
KNOTS, MPH, KM/H,
M/S. Maximum wind
speed is saved on the dis-
play until reset by the op-
erator. Wind direction in-
formation is clearly dis-
played on a circular pattern
of LEDs. Bold front panel
graphics give a quick indi-
cation of wind angle relative to vessel heading.
Brightness control allows adjustment for best viewing
in any light. Luminous front panel markings allow
viewing even in a darkened pilothouse.4-20 mA in-
puts, Serial NMEA, and Voltage outputs are standard
on the Marine Wind Tracker. Alarms for both wind
speed and wind direction are included.
ANEMOMETER
Model 05106
RM YOUNG Wind sensor
The sensor features durable,
corrosion-resistant construction
with opposing pairs of ultrason-
ic transducers secured in a
streamlined molded frame. The
85000 is fully wind-tunnel test-
ed and calibrated to provide
accurate wind measurement
over a wide operating range.
The standard sensor includes
many useful output options.
Analog voltage outputs are pro-
vided for wind speed and wind
direction. A variety of serial output formats are
also available on the standard sensor. These
include ASCII text, RMYT (compatible with
YOUNG displays), NMEA and SDI-12 for-
mats. The sensor installs on readily available 1
inch (IPS) pipe. Wiring connections are made
in a convenient weatherproof junction box;
special mounting adapters, connectors and ca-
bles are not required.
Model 85000
RM YOUNG Ultrasonic Anemometer
Wind Speed Range
1-100 MPH
0-50 M/S
0-200 KM/S
0-100 KNOTS
Wind Direction Range
0-180 degrees (port & starboard
Wind Speed Range
0-156 MPH
0-70 M/S
Accuracy
(30 M/S) ± 2%
(70 M/S) ± 3%
Resolution
0.1 M/S
Wind Direction Range
0-360 degrees
Marine Wind Tracker Display
The Marine Wind Tracker is very compact. Face size is 144 mm x 144
mm to fit standard DIN panel configurations. Depth is 36 mm for easy
mounting on vertical bulkheads or wall surfaces. 12-30 VDC input
power enables the Wind Tracker to be powered by ship’s batteries. A
universal mounting bracket and AC wall adapter are included. Model
06260 Protective enclosure offers extra protection for wet or dusty lo-
cations. This display can be used with either the Young Wind Tracker
05106 or the Ultrasonic Anemometer 85000.
Model 06206H
WTN Electronics, Ltd.
Tel: 763-473-3825
Fax: 763-473-3521
Email: info@wtnltd.com
16920 28th Ave. N.
Minneapolis, MN 55447
U.S.A.
Page 34
Vista de pagina 38
1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 91 92

Comentarios a estos manuales

Sin comentarios