ACR Electronics Nauticast 2625 Manual de instalación descargar pdf (Pagina 14)

Installation Manual 10 Y1-03-0204 Rev.J

3.4.3 Pilot Port CH 5

The used sentence formatters for the pilot plug are the same as those listed for the ECDIS

port.

Note:

A pilot input/output port is part of an AIS Class A installation. A plug connected to this port

should be installed on the bridge near the pilot’s operating position, so that a pilot can

connect a Personal Pilot Unit (PPU) if required. Also, a power connector for the pilot unit

should be available nearby.

The pilot plug should be configured as follows: (Refer to SUB-COMMITTEE ON SAFETY OF

NAVIGATION NAV48/18 2.4.2002)

AMP/Receptacle (Square Flanged (-1) or Free-Hanging (-2)), Shell size 11, 9-pin,

Std. Sex 206486-1/2 or equivalent with the following connections:

- Tx A (out-) is connected to Pin 1

- Tx B (out+) is connected to Pin 4

- Rx A (in-) is connected to Pin 5

- Rx B (in+) is connected to Pin 6

- Shield is connected to Pin 9

3.4.4 Long Range CH 8

The AIS long range function requires a compatible long range communication system (e.g.

Inmarsat-C or MF/HF radio as part of GMDSS). This connection is required in order to

activate the long range function of the AIS. Its input/output port must meet the IEC 61162-2

requirements.

Sentence Formatters Direction

LRI UAIS Long Range Interrogation Input

LRF

UAIS Long-Range Function Input / Output

LR1

UAIS Long-Range Reply Sentence l Output

LR2 UAIS Long-Range Reply Sentence 2 Output

LR3

UAIS Long-Range Reply Sentence 3 Output

Field Information:

All fields are provided for input and output.

For further information please refer to

IEC 61993-2 / NMEA 0183 HS V3.0 for detailed field

information.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 74 75

Sin comentarios

ACR Electronics Nauticast 2625 Manual de instalación Pagina 14