ACR Electronics Nauticast 2625 Manual de instalación descargar pdf (Pagina 34)

Installation Manual 30 Y1-03-0204 Rev.J

Attenuation values

Type Name Part number Total gain

GPS-Antenna GPS-Antenna Marina 2 2625 +35dBi

GPS-Antenna Procom GPS4 2622 +35dBi

Comb. GPS/VHF-Antenna Comrod AC-17 2624 +20dBi (GPS amp gain)

Cable RG214 2630 -15,75 dB

Adapter GPS-VHF Adapter cable with

1m RG58 / TNC connector

2612 -1dB

Connector TNC plug RG214 crimp 2633 -0,1dB

Example

Procom GPS4 + 35,00dBi

11m RG214 0,35 dB/m - 3,85dB

maybe 2 TNC plugs - 0,20dB

Nauticast with Adapter P/N 2610 -1,00dB

Total 29,95dB

Necessary minimum attenuation

(=> 12dB Attenuator needed!)

≥11,95dB

GPS Input ≤18,00dB

Attention

If installations are not in compliance to this requirement we cannot guarantee operation nor

accept a warranty issue.

Antenna Layout

The position of the VHF and GNSS – antennas must be added to the existing antenna layout

of the vessel.

3.11.3 Power Supply

The NAUTICAST must be supplied from the emergency power source. A further requirement

is to connect AIS to the reserve power source of the GMDSS. A new battery capacity

calculation must then be undertaken. See sample in 8.1 (Samples for battery calculation)

Following documents are needed for the installation approval of the classification

• Antenna Layout (arrangement)

• Battery Calculation

• Connection / Block – Diagram with locations

• Type Approval Certificate

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 74 75

Sin comentarios

ACR Electronics Nauticast 2625 Manual de instalación Pagina 34