ACR Electronics Nauticast 2625 Manual de instalación descargar pdf (Pagina 35)

Installation Manual 31 Y1-03-0204 Rev.J

4 Starting the NAUTICAST

Setting up your AIS Transponder for operation.

ATTENTION: IMO REGULATIONS MANADATE THAT YOU ENTER THIS INFORMATION.

After installing the antennas and hardware the following User, Voyage related and Ship

Settings data needs to be entered. Upon Start-up (Applying power) enter the following

information.

a.) Enter MMSI Number - See paragraph 4.1 on entering information.

b.) Enter IMO Number - See paragraph 4.1 on Entering information.

c.) Voyage related Data – After initial entry of the Voyage related Data any changes in the

information below should be edited accordingly.

See Paragraph 4.2 on entering information.

Enter Cargo Type

Enter Draught

Enter Destination

Enter ETA

Enter Navigation Status.

d.) Enter Ship Settings Data - After initial entry of the Ship Settings Data any changes in the

information below should be edited accordingly. See Paragraph 4.3 on entering information.

Enter Call Sign

Enter Ships Name

Enter Length of Ship

Enter Beam of Ship

Enter Internal GPS antenna Position

Enter External GPS Antenna Position (If Applicable).

Enter Ship Type

e.) Password – Service and User passwords see section 4.4

4.1 Entering the MMSI and IMO Numbers:

Select from the Main Menu “Service Configuration” Number 6. Menu is SERVICE

password protected with default password “NAUT”. Enter Service Password and use the up

and down arrows on keypad to select “Change MMSI / IMO” than press M5 “Select” or “by

pressing number 3 on the keypad.

Input your MMSI and IMO number and press Save to store data. Unit will reboot itself after

pressing Save. Continue to 4.2 after reboot, if no IMO number is available use the value 0

(Zero).

N 1

19' E 0

3' |1>0.01|2>1.30|3>1.80nm

|----------------------------------

| Menu

-----| |

| +- 1. Messages

View | +- 2. AIS Status

| +- 3. Voyage Settings

-----| +- 4. Ship Settings

| +- 5. Transponder Configuration

Msg. | +- 6. Service Configuration

| +- 7. Display Settings

-----| +- 8. Graphical Display Settings

Displ|

----------------------------------------

NUM|Select->| | |<-Back

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 74 75

Comentarios a estos manuales

Sin comentarios

ACR Electronics Nauticast 2625 Manual de instalación Pagina 35

Comentarios a estos manuales

Relacionado con productos y manuales para Receptor ACR Electronics Nauticast 2625